C1232
DTC C1232/32 Stuck in Deceleration SensorDESCRIPTION
DTC Detection Condition:
The deceleration sensor is built into the yaw rate sensor.
The yaw rate sensor signal is sent to the skid control ECU through the CAN communication system. When there is a malfunction in communication, it will be detected by the diagnosis function.
HINT: When U0121/94, U0123/62, U0124/95 or U0126/63 are output accompanied with C1210/36 or C1336/39, inspect and repair the trouble areas indicated by U0121/94, U0123/62, U0124/95 or U0126/63 first.
Wiring Diagram:
Step 1:
Step 2:
INSPECTION PROCEDURE