Map Light: Service and Repair

MAP LIGHT ASSEMBLY

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE MAP LIGHT ASSEMBLY (w/ Sliding Roof)
3. REMOVE MAP LIGHT ASSEMBLY (w/o Sliding Roof)

INSTALLATION

1. REMOVE MAP LIGHT ASSEMBLY (w/ Sliding Roof)
2. REMOVE MAP LIGHT ASSEMBLY (w/o Sliding Roof)
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

4. PERFORM INITIALIZATION
a. Perform initialization.

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.