Back Door Courtesy Switch

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE BACK DOOR GARNISH CENTER
3. REMOVE BACK DOOR SIDE GARNISH LH
4. REMOVE BACK DOOR SIDE GARNISH RH
5. REMOVE BACK DOOR TRIM BOARD ASSEMBLY
6. REMOVE BACK DOOR LOCK ASSEMBLY

INSTALLATION

1. INSTALL BACK DOOR LOCK ASSEMBLY
2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY
3. INSTALL BACK DOOR SIDE GARNISH RH
4. INSTALL BACK DOOR SIDE GARNISH LH
5. INSTALL BACK DOOR GARNISH CENTER
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION
a. Perform initialization.

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.