Brake Warning Indicator: Testing and Inspection

CHECK BRAKE WARNING LIGHT




a. Check the parking brake warning light.
1. Disconnect the P6 switch connector.
2. Connect the P6-1 terminal of the wire harness side connector to the body ground.
3. Turn the ignition switch ON, and then check that the warning light turns on.
OK:Warning light turns on.




b. Check the brake fluid level warning light.
1. Disconnect the B2 switch connector.
2. Connect the B2-1 and B2-2 terminals of the wire harness side connector.
3. Turn the ignition switch ON, and then check that the warning light turns on.
OK:Warning light turns on.
If the result is not as specified, the combination meter may have a malfunction.