Clutch Switch: Service and Repair

CLUTCH START SWITCH ASSEMBLY (MTM)
REPLACEMENT
1. REMOVE CLUTCH START SWITCH ASSEMBLY
a. Disconnect the clutch start switch assembly connector.





b. Remove the 2 nuts and the clutch start switch assembly with the bracket.
c. Remove the nut and clutch start switch assembly from the bracket.
2. INSTALL CLUTCH START SWITCH ASSEMBLY
a. Install the clutch start switch assembly with the nut.
Torque: 6.2 Nm (63 kgf-cm, 55 in. lbs.)
b. Install the clutch start switch with the 2 nuts.
Torque: 6.2 Nm (63 kgf-cm, 55 in. lbs.)
c. Connect the clutch start switch assembly connector.
3. INSPECT CLUTCH START SWITCH ASSEMBLY