Front

FRONT AXLE LH HUB BOLT
REPLACEMENT

1. REMOVE FRONT WHEEL
2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY LH
3. REMOVE FRONT DISC





4. REMOVE FRONT AXLE LH HUB BOLT
a. Using SST and a screwdriver or an equivalent to hold the axle hub sub-assembly LH, remove the LH hub bolt.
SST 09628-10011





5. INSTALL FRONT AXLE LH HUB BOLT
a. Install the washer and the nut to a new LH hub bolt as shown in the illustration.
b. Using a screwdriver or an equivalent to hold the axle hub sub-assembly LH, install the LH hub bolt by tightening the nut.
6. INSTALL FRONT DISC
7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY LH
8. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)