Airbag Assembly Connectors
DISCONNECTIONa. Push down the housing lock (white part) and slide the CPA (yellow part). (At this time, the connector cannot be disconnected yet).
b. Push down the housing lock (white part) again and disconnect the connector.
HINT: Do not push down the A part shown in the illustration when disconnecting.
c. After disconnecting the connector, check that the position of the housing lock (the white part) is as shown in the illustration.
CONNECTION
a. Before connecting the connectors, check that the position of the housing lock (the white part) is as shown in the illustration.
b. Be sure to engage the connectors until they are locked. (When locking, make sure that a click sound can be heard.)
HINT: When connecting them, the housing lock (white part) slides. Be sure not to hold the housing lock (white part) and A part, as it may result in an insecure fit.