Engine Control Module: Service and Repair

REPLACEMENT

1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
2. REMOVE ECM
a. Disconnect the 4 ECM connectors.
b. Remove the 2 bolts, then remove the ECM.
c. Remove the 2 screws and ECM bracket from the ECM.
d. Remove the 2 screws and ECM bracket No. 2 from the ECM.
e. Remove the 2 screws and ECM bracket No. 3 from the ECM.

3. INSTALL ECM

Torque: 3.0 N.m (31 kgf.cm, 27 in.lbf)

4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY