Condenser HVAC: Testing and Inspection
W/RECEIVER CONDENSER ASSEMBLYON-VEHICLE INSPECTION
1. INSPECT W/RECEIVER CONDENSER ASSEMBLY.
a. If the fin of the w/receiver condenser assembly is dirty, clean it with water and dry it with compressed air.
NOTE: Be careful not to damage the fin of the w/receiver condenser assembly.
b. If the fin of the w/receiver condenser assembly is bent, use a screwdriver or pliers to straighten it.
2. INSPECT CONDENSER FOR LEAKAGE OF REFRIGERANT
a. Using a halogen leak detector, check the pipe joints for gas leakage.
b. If gas leakage is detected in a joint, check the torque of the joint.