Speaker: Testing and Inspection

FRONT NO.1 SPEAKER ASSEMBLY
a. Inspect front No.1 speaker assembly continuity.
1. Check that there is continuity between terminal.







REAR SPEAKER ASSEMBLY
a. Inspect rear speaker assembly continuity.
1. Check that there is continuity between terminal.

INSPECT FRONT NO.2 SPEAKER ASSEMBLY
a. Remove the instrument panel speaker panel sub-assembly No.2.
b. Remove the front No.2 speaker assembly.
c. Disconnect the connector.
d. Replace the right and left speakers with one another and check if they play normally.

Standard:
They play normally.