Rear Door Glass Weatherstrip

REAR DOOR GLASS WEATHERSTRIP ASSEMBLY OUTER LH

REPLACEMENT

HINT:
- The installation procedures are the removal procedures in reverse order.
- Use the same procedures for the RH side and LH side.

1. REMOVE REAR DOOR REAR GUIDE BRACKET GARNISH LH
2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY REAR
3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH
4. REMOVE REAR DOOR INSIDE HANDLE SUB-ASSEMBLY LH
5. REMOVE REAR DOOR TRIM BRACKET N0.2
6. REMOVE REAR DOOR SERVICE HOLE COVER RH
7. REMOVE REAR DOOR GLASS WEATHERSTRIP ASSEMBLY OUTER LH




a. Put protective tape under the weatherstrip.
b. Using a moulding remover, pry out the weatherstrip as shown in the illustration.

HINT: Tape the remover tip before use.