Headlamp Dimmer Switch: Testing and Inspection

a. Inspect the light control switch continuity.
1. Measure the resistance according to the value(s) in the table.
Replace the switch as necessary.

b. Inspect the headlight dimmer switch continuity.
1. Measure the resistance according to the value(s) in the table.

HINT: Turn the headlamp dimmer switch to the HEAD position when checking "LOW BEAM" and "HI BEAM".
Replace the switch as necessary.

c. Inspect the turn signal switch continuity.
1. Measure the resistance according to the value(s) in the table.
Replace the switch as necessary.

d. Inspect the front fog lamp switch continuity.
1. Measure the resistance according to the value(s) in the table.
Replace the switch as necessary