Component Inspection
INSPECT BRAKE WARNING LIGHTa. Inspect the parking brake warning light.
1) Disconnect the connector from the parking brake switch.
2) Turn the ignition switch to ON.
3) Ground the terminal of the wire harness side connector, then check the parking brake warning light.
OK: Brake warning light comes on.
b. Inspect the brake fluid level warning light.
1) Disconnect the connector from the brake fluid level warning switch.
2) Turn the ignition switch to ON.
3) Connect a terminal to other terminal of wire harness side connector, then check the brake fluid level warning switch.
OK: Brake warning light comes on.