Antenna Amplifier: Service and Repair

Audio & Visual System:

AMPLIFIER ANTENNA ASSEMBLY

REPLACEMENT

1. REMOVE ROOF HEADLINING ASSEMBLY
2. REMOVE ROOF ANTENNA POLE SUB-ASSEMBLY




3. REMOVE AMPLIFIER ANTENNA ASSEMBLY
a. Disconnect the connectors.
b. Disengage the clamp.
c. Remove the nut and the amplifier antenna assembly.




4. INSTALL AMPLIFIER ANTENNA ASSEMBLY
a. Set the amplifier antenna assembly to the hole on the roof, and place the antenna cord on the cutout on the antenna nut.
b. Install the amplifier antenna assembly with the antenna nut.

Torque: 5.0 Nm (51 kgf.cm, 44 in.lbf)

c. Install the clamp.

5. INSTALL ROOF HEADLINING ASSEMBLY