System Outline

System Outline

1. Manual Up and Down Function
This function operates the window to open or close while the power window switch is being pulled up or pushed down (Should be pulled up and down halfway for manual operation.). The window stops as soon as the switch is released.

2. One-Touch Auto Up and Down Function
"One-touch auto up and down function" enables the window of front doors to be fully opened or closed with a touch of the power window switch.

3. Jam Protection Function
The jam protection function automatically stops the power window and moves it downward if a foreign object gets jammed in the course of the window during one-touch auto-up operation.

4. Remote Control Function
The up and down operation of the front passenger door windows can be controlled by operating the power window master switch.

5. Key-Off Operation Function
Within about 43 seconds when turn OFF the ignition SW or until the driver's or passenger's door is opened, this function enables the door window operation with the power window master switch and/or the manual operation at each passenger's seat door.

- When the battery terminal or fuse is disconnected, the glass position of all door windows have to be reset to the initial positions, one by one, with the power window control switch by following the procedure below:

A. Reconnect the battery terminal or fuse.
B. Turn ON the ignition switch.
C. Lower the window of each door halfway or more with the power window switch.
D. Then close the window fully with the power window switch. Do not release the switch for at least 2 seconds after the window is fully closed.