Clutch Switch: Service and Repair

CLUTCH START SWITCH ASSEMBLY (MTM)
REPLACEMENT
1. REMOVE CLUTCH START SWITCH ASSEMBLY
a. Disconnect the clutch start switch assembly connector.
b. Remove the nut and clutch start switch assembly from the clutch pedal support.
2. INSTALL CLUTCH START SWITCH ASSEMBLY
a. Install the clutch start switch assembly with the nut.
Torque: 16 Nm (160 kgf-cm, 12 ft. lbs.)
b. Connect the clutch start switch assembly connector.
3. INSPECT CLUTCH START SWITCH ASSEMBLY