Programming and Relearning

PRECAUTION

NOTE: When disconnecting the battery terminal, initialize the following system after the terminal is reconnected.

System
Power window control system
Sliding roof system

1. Pay attention to the following points when inspecting the cruise control system.
a. Push the cruise control main switch ON-OFF button off when not using the cruise control.
b. Be careful of vehicle speed increase when driving downhill with the cruise control on.
c. "RES/+" operation, after canceling the cruise control, works as RESUME, and works as "+" (ACCEL) while the cruise control system is in operation.
d. Push the cruise control main switch ON-OFF button off and reset the cruise control if the CRUISE main indicator light blinks while the cruise control system is in operation. When the cruise control cannot be set by this procedure or cancelled immediately after setting, there may be a malfunction in the system.
e. Do not use the cruise control system where the road conditions are as follows:
- Heavy traffic
- Steep downhill
- Sharp turns
- Icy or snowy roads
- Slippery roads