Shift Cable: Service and Repair

TRANSMISSION CONTROL CABLE ASSY (ATM)
REPLACEMENT

HINT:
^ INSTRUMENT PANEL METER
^ FLOOR SHIFT ASSY

1. REMOVE CONSOLE BOX REAR COVER
2. REMOVE CONSOLE BOX CARPET
3. REMOVE CONSOLE BOX SUB-ASSY REAR
4. REMOVE EXHAUST PIPE ASSY FRONT
5. REMOVE FRONT FLOOR HEAT INSULATOR NO.1
6. REMOVE AIR CLEANER ASSY





7. DISCONNECT TRANSMISSION CONTROL CABLE ASSY
a. Remove the nut, disconnect the transmission control cable assy from the floor shift assy.
b. Using a screwdriver, disconnect the transmission control cable assy from the shift lever plate.





c. Remove the 3 bolts.
d. Pull out the transmission control cable assy from the body.





e. Remove the nut and disconnect the transmission control cable assy from the control shaft lever.
f. Remove the clip and disconnect the transmission control cable assy from the control cable bracket.





g. Disconnect the transmission control cable assy from the transmission control cable support.





8. CONNECT TRANSMISSION CONTROL CABLE ASSY
a. Temporarily install the transmission control cable assy on the control shaft lever with the nut.
b. Connect the transmission control cable assy with a new clip on the bracket.





c. Connect the transmission control cable assy to the transmission control cable support.





d. Install the transmission control cable assy on the body with the 3 bolts.
Torque: 5.0 Nm (51 kgf-cm, 44 in. lbs.)





e. Connect the transmission control cable assy on the shift lever plate.
f. Temporarily install the transmission control cable assy on the floor shift assy.
Torque: 12 Nm (122 kgf-cm, 9 ft. lbs.)
9. INSTALL AIR CLEANER ASSY
10. INSTALL FRONT FLOOR HEAT INSULATOR NO.1
Torque: 5.5 Nm (56 kgf-cm, 49 ft. lbs.)
11. INSTALL EXHAUST PIPE ASSY FRONT
12. ADJUST SHIFT LEVER POSITION
13. INSPECT SHIFT LEVER POSITION
14. INSTALL CONSOLE BOX SUB-ASSY REAR
15. INSTALL CONSOLE BOX CARPET
16. INSTALL CONSOLE BOX REAR COVER