Crankshaft, Engine

Crankshaft thrust clearance
Standard 0.09 to 0.19 mm (0.0035 to 0.0075 in.)
Maximum 0.03 mm (0.0012 in.)
Crankshaft circle runout
Maximum 0.03 mm (0.0012 in.)
Main journal diameter 45.988 to 46.000 mm (1.8106 to 1.8110 in.)
Main journal taper and out-of-round
Maximum 0.02 mm (0.0008 in.)
Crankshaft oil clearance
Standard 0.01 to 0.023 mm (0.0004 to 0.0009 in.)
Maximum 0.07 mm (0.0028 in.)
Drive plate & ring gear x Crankshaft A/T 88 Nm (900 kgf-cm, 65 ft. lbs.)
Flywheel x Crankshaft M/T
1st 49 Nm (500 kgf-cm, 36 ft. lbs.)
2nd Turn 90° Turn 90° Turn 90°
Crankshaft damper x Crankshaft 128 Nm (1,305 kgf-cm, 95 ft. lbs.)