Replacement

Instrument Panel Passenger Airbag Assy:

REPLACEMENT

1. OBSERVE RESTRAINT SYSTEMS SERVICE PRECAUTIONS
2. DISCONNECT BATTERY NEGATIVE TERMINAL
3. REMOVE INSTRUMENT PANEL SPEAKER PANEL SUB-ASSY NO.1
4. REMOVE INSTRUMENT PANEL SPEAKER PANEL SUB-ASSY NO.2




5. DISCONNECT INSTRUMENT PANEL PASSENGER AIRBAG ASSY CONNECTOR
a. Remove the passenger airbag connector clip.
b. Disconnect the passenger airbag connector.

NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.

6. REMOVE INSTRUMENT PANEL SUB-ASSY UPPER W/INSTRUMENT PANEL PASSENGER AIRBAG ASSY
7. REMOVE INSTRUMENT PANEL PASSENGER AIR BAG ASSY




a. Remove the 2 nuts.




b. Disengage the 12 claws of the instrument panel passenger airbag assy, and then remove the instrument panel passenger airbag assy from the instrument panel sub-assy upper.

8. INSTALL INSTRUMENT PANEL PASSENGER AIR BAG ASSY
a. Install the instrument panel passenger airbag with 2 nuts.

Torque: 5.0 Nm (50 kgf.cm, 43 in.lbf)

9. INSPECT INSTRUMENT PANEL PASSENGER AIR BAG ASSY
10. INSTALL INSTRUMENT PANEL SUB-ASSY UPPER W/INSTRUMENT PANEL PASSENGER AIRBAG ASSY
11. CONNECT INSTRUMENT PANEL PASSENGER AIRBAG ASSY CONNECTOR
12. INSPECT SRS WARNING LIGHT
Refer to Air Bag Systems; Testing and Inspection.