Cigarette Lighter: Service and Repair

Audio & Visual System:

CIGARETTE LIGHTER ASSY

REPLACEMENT

1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSY CTR
3. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSY LOWER CENTER




4. REMOVE CIGARETTE LIGHTER COVER
a. Disengage the 2 claws and remove the cigarette lighter cover.

5. REMOVE CIGARETTE LIGHTER ASSY




a. Remove the cigarette lighter knob and element assy.
b. Turn the socket in the direction as shown in the illustration, disengage the claw between the socket and the cigarette lighter bezel stay, and pull out the socket.




c. Align the socket with the notch on the cigarette lighter bezel stay, and remove the cigarette lighter assy.

6. INSTALL CIGARETTE LIGHTER ASSY
a. Align the socket with the notch on the cigarette lighter bezel stay and push the cigarette lighter assy in as hard as possible.
b. Install the cigarette lighter knob and element assy.