Speaker: Testing and Inspection

FRONT NO.1 SPEAKER ASSY
a. Inspect front No.1 speaker assy continuity.
1. Check that there is continuity between terminal.







REAR SPEAKER ASSY
a. Inspect rear speaker assy continuity.
1. Check that there is continuity between terminal.

INSPECT FRONT NO.2 SPEAKER ASSY
a. Remove the instrument panel speaker panel sub-assy No.2.
b. Remove the front No.2 speaker assy.
c. Disconnect the connector.
d. Replace the right and left speakers with one another and check if they play normally.

Standard:
They play normally.