Driver or Passenger Seat Adjuster Handle Replacement

Driver or Passenger Seat Adjuster Handle Replacement

Removal Procedure

1. Position the seat to the most forward position.
2. Remove the height adjuster panel.
Release with a plastic wedge.




3. Remove the height adjuster.
Remove the 2 bolts (1) and the lever.

Installation Procedure

Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the height adjuster.

Tighten the 2 bolts to 35 Nm (26 lb ft).

2. Install the height adjuster panel.
Clip in panel.
3. Reposition the seat to the original position.