Sunroof Window Replacement - Rear

Sunroof Window Replacement - Rear

Removal Procedure

1. Open the sunshade.
2. Open the sunroof to the vent position.




3. Remove the rear window.

1. Push up on the side covers to access the screws.
2. Remove the 4 screws.

4. Remove the rear window.

Installation Procedure





Note:
* Tighten the rear window in the upper position.
* Install the position window pane with the curve facing down.

1. Insert the rear window.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the rear window.
Align the rear window gap 1.5-2 mm (0.06-0.08 in).

Tighten the 4 screws to 4 Nm (35 lb in).

3. Close the sunroof rear window.
4. Close the sunshade.