Quarter Lower Rear Trim Panel Replacement (Sedan)

Quarter Lower Rear Trim Panel Replacement (Sedan)

Removal Procedure




1. Remove the rear seat.

* Disconnect the loop (1) and support in the rear area (arrow).
* Remove the rear seat upwards.




2. Remove the rear seat backrest.

* Remove the 3 bolts at the front.
* Remove the 3 belt buckles.
* Fold down the rear seat backrest.
* Remove the 3 bolts at the back.




3. Remove the rear seat backrest.
With the aid of an assistant, remove the rear seat backrest from the side guide.




4. Remove the rear quarter lower trim.
Remove the rear quarter trim (arrows).

Installation Procedure

1. Install the rear quarter lower trim.
2. Insert the rear seat backrest.
With the aid of an assistant, insert the rear seat backrest into the side guide.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the rear seat backrest.

Tighten the 3 bolts at back to 20 Nm (15 lb ft).

Note: Use screw locking compound.

4. Fold down the rear seat backrest.

Tighten the front 3 bolts to the belt buckle to 20 Nm (15 lb ft).

5. Install the rear seat.
Insert the rear seat cushion and position.