Liftgate Trim Panel Replacement (Sedan)

Liftgate Trim Panel Replacement (Sedan)

Removal Procedure




1. Remove the lock cover trim panel.

* Release the clip.
* Remove the bolt.




2. Remove the upper garnish molding (2)-left side.

* Remove the luggage shade bracket (3).
* Release the 4 clips.

3. Remove the upper garnish molding (2)-right side.

* Remove the luggage shade bracket (3).
* Release the 4 clips.

4. Remove the liftgate trim panel (1).
Release the 8 clips.

Installation Procedure

1. Install the liftgate trim panel.
Install the 8 clips.
2. Install the upper garnish molding-left side.
Install the 4 clips.
3. Install the upper garnish molding-right side.
Install the 4 clips.

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the lock cover trim panel.
Install the clip.

Tighten the bolt.