Turbocharger Coolant Return Pipe Replacement (LNF)

Turbocharger Coolant Return Pipe Replacement (LNF)

Removal Procedure





1. Drain the cooling system. Refer to Cooling System Draining and Filling (GE-47716) (Service and Repair)Cooling System Draining and Filling (2.4L LE5 Only) Cooling System Draining and Filling (Static Fill-LNF) (Service and Repair) .
2. Remove the catalytic converter. Refer to Catalytic Converter Replacement (LNF) (Service and Repair)Catalytic Converter Replacement (LE5).
3. Remove the turbocharger coolant return pipe bolt at the turbocharger.
4. Remove the turbocharger coolant return pipe bolt at the thermostat housing.
5. Remove the gaskets from both banjo fittings on the turbocharger coolant return pipe.



Installation Procedure





1. Install NEW gaskets to both banjo fittings on the turbocharger coolant return pipe.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the turbocharger coolant return pipe bolt at the turbocharger.

Tighten the bolt to 35 N.m (26 lb ft).

3. Install the turbocharger coolant return pipe bolt at the thermostat housing.

Tighten the bolt to 35 N.m (26 lb ft).

4. Install the catalytic converter. Refer to Catalytic Converter Replacement (LNF) (Service and Repair)Catalytic Converter Replacement (LE5).
5. Fill the cooling system. Refer to Cooling System Draining and Filling (GE-47716) (Service and Repair)Cooling System Draining and Filling (2.4L LE5 Only) Cooling System Draining and Filling (Static Fill-LNF) (Service and Repair) .