Rear Seat Belt Buckle Replacement

Rear Seat Belt Buckle Replacement

Removal Procedure





1. Remove the rear seat.

* Disconnect at the loop (1) and support in the rear area, arrow.
* Remove the rear seat upwards.





2. Remove the rear seat belt buckle.

* Remove the bolt.
* Remove the rear seat belt buckle.




Installation Procedure


Notice: Refer to Fastener Notice (Fastener Notice) .


Important: Use screw locking compound.


1. Install the rear seat belt buckle.
Insert the rear seat belt buckle.

Tighten the bolt to 20 N.m (15 lb ft).

2. Install the rear seat.
Insert the rear seat cushion and position.