Driver Seat and Passenger Seat Adjuster Handle Replacement

Driver Seat and Passenger Seat Adjuster Handle Replacement

Removal Procedure

1. Position the seat to the most forward position.
2. Remove the height adjuster panel.
Release with a plastic wedge.




3. Remove the height adjuster.
Remove the 2 bolts (1) and the lever.



Installation Procedure


Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the height adjuster.

Tighten the 2 bolts to 35 N.m (26 lb ft).

2. Install the height adjuster panel.
Clip in panel.
3. Reposition the seat to the original position.