Center Pillar Upper Garnish Molding Replacement (Coupe)

Center Pillar Upper Garnish Molding Replacement (Coupe)

Removal Procedure





1. Remove the center pillar deflection sheave.

* Remove the bolt.
* Remove the deflection sheave cover (2).

2. Remove the upper center pillar trim.

* Release the 2 airbag access panel (1).
* Release the 2 center pillar clips with a plastic wedge.




Installation Procedure

1. Install the upper center pillar trim.

* Install the 2 center access pillars.
* Install the 2 airbag panel clips.


Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the center pillar deflection sheave.

Tighten the bolt to 30 N.m (22 lb ft).

3. Install the deflection sheave cover.