Torque Converter Fluid Seal Replacement

Torque Converter Fluid Seal Replacement

Tools Required

* J 8092 Universal Driver Handle
* J 44766 Seal Installer
* J 45000 Seal Remover

Removal Procedure

1. Remove the transmission torque converter.





2. Remove and discard the torque converter seal bolts.
3. Remove the torque converter seal using J 45000.

Installation Procedure





1. Assemble J 8092 onto J 44766.
2. Install the torque converter seal onto the tool before installing into the case to prevent damage to the seal.

Important: Align the torque converter seal with the bolt holes.

3. Install the torque converter seal into the torque converter housing.

Notice: Refer to Fastener Notice.

4. Install the torque converter seal bolts.

Tighten the NEW torque converter seal bolts to 3.6 N.m (32 lb in).

5. Install the transmission torque converter.