Evaporative Emission (EVAP) Hoses/Pipes Replacement - Canister/Fuel Tank

Evaporative Emission Hoses/Pipes Replacement - Canister/Fuel Tank

Removal Procedure




1. Remove the fuel tank..
2. Disconnect the evaporative emission (EVAP) line quick connect fitting from the fuel pump module.
3. Disconnect the EVAP line quick connect fitting at the EVAP canister.
4. Disconnect the EVAP line from the roll over valve.
5. Cap or plug the EVAP connections, fuel pump module, and canister in order to prevent system contamination.
6. Disengage the EVAP line from the fuel tank retaining features.
7. Remove the EVAP line (1) from the fuel tank.

Installation Procedure




1. Install the EVAP line (1) to the fuel tank.
2. Engage the EVAP vapor line to the fuel tank retaining features.
3. Remove the caps or plugs from the EVAP line connections, fuel pump module, and canister.
4. Connect the EVAP line quick connect fitting to the roll over valve.
5. Connect the EVAP line quick connect fitting at the fuel sender.
6. Connect the EVAP line quick connect fitting at the EVAP canister.
7. Install the fuel tank.