Turbocharger Coolant Return Pipe Replacement

Turbocharger Coolant Return Pipe Replacement (LNF)

Removal Procedure




1. Drain the cooling system.
2. Remove the catalytic converter.
3. Remove the turbocharger coolant return pipe bolt at the turbocharger.
4. Remove the turbocharger coolant return pipe bolt at the thermostat housing.
5. Remove the gaskets from both banjo fittings on the turbocharger coolant return pipe.

Installation Procedure




1. Install NEW gaskets to both banjo fittings on the turbocharger coolant return pipe.

Notice: Refer to Fastener Notice.

2. Install the turbocharger coolant return pipe bolt at the turbocharger.

Tighten the bolt to 35 N.m (26 lb ft).

3. Install the turbocharger coolant return pipe bolt at the thermostat housing.

Tighten the bolt to 35 N.m (26 lb ft).

4. Install the catalytic converter.
5. Fill the cooling system.