Shift Control Replacement

Shift Control Replacement

Removal Procedure

1. Remove the console top cover.
2. Remove the shift cables from the shifter assembly.




3. Remove the 2 front mounting nuts (2).
4. Remove the 2 rear mounting nuts (3) and the shifter.

Installation Procedure




1. Position the shifter on the studs and install the front 2 nuts (2).

Notice: Refer to Fastener Notice.

2. Install the 2 rear nuts (3).

Tighten the nuts to 25 N.m (18 lb ft).

3. Install the shift cables.
4. Install the console.