Front Suspension

Front Lower Control Arm Bushing Replacement

Tools Required

KM-906-B Bushing Remover/Installer Kit

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the lower control arm.
3. Wrap the control arm with a shop towel and place it in a vise.





Important: Note the depth and orientation of the old bushing before removal.

4. Using the KM-906-B, pull the control arm bushing through the control arm.
5. Disassemble the tools and remove the bushing.

Installation Procedure

1. Place the NEW bushing to the tapered side of the control arm.




2. Using the KM-906-B, pull the control arm bushing through the opposite direction of the control arm.
3. Install the bushing to the same depth and orientation as noted during removal.
4. Remove the KM-906-B from the control arm.
5. Install the control arm.