Seat Belt Guide Track: Service and Repair

Guide Replacement - Rear Seat Shoulder Belt

Removal Procedure




1. Release the rear seat back latch by pulling the handle in the trunk.
2. Lower the rear seat back.




3. Release the push-in retainer from the garnish molding on the lower lock pillar.
4. Remove the child comfort guide from the garnish molding.

Installation Procedure




1. Install the child comfort guide to the garnish molding of the lower lock pillar.
2. Install the push-in retainer.
3. Lift the rear seat back.
4. Push on the seat back over the latch locations to ensure that the latches engage.

Important: Ensure that the seat belt webbing is not trapped behind the seat back.

5. Pull up on the seat back to ensure that the seat back is latched.
6. Verify that the seat belt operates properly.