Front Door Striker: Service and Repair

Door Striker Replacement

Removal Procedure




1. Remove the striker bolts (2).
2. Remove the washer (4).
3. Remove the spacer (3).
4. Remove the striker (1).

Installation Procedure




1. Install the washer (4).
2. Install the spacer (3).
3. Install the striker (1).
4. Align the lock striker. Refer to Door Lock Striker Adjustment (Sedan, Coupe - Front).

Notice: Refer to Fastener Notice.

5. Install the striker bolts (2).

Tighten the striker bolts (2) to 25 N.m (18 lb ft).