Scan Tool Data Definitions

SCAN TOOL DATA DEFINITIONS

Battery 1: The scan tool displays 0-25.5 volts. The state of the battery voltage supplied to the body control module (BCM).

Front Washer Motor Input: The scan tool displays On/Off. This input displays On when the front washer spray is on.

Front Wiper Relay Cmd.: The scan tool displays On/Off. The body control module will indicate if it is commanding the front wiper relay On or Off.

Front Wiper Relay Fdbk.: The scan tool displays High/Low. This input to the BCM displays the state of the front wiper relay feedback circuit. Low is displayed when the BCM is providing a ground to the front wiper relay control circuit.

Front Wiper Switch: The scan tool displays On/Off. This input displays On when the front wipers are ON.

Washer Fluid Level: The scan tool displays Low or OK. The BCM will display Low when the washer fluid level is Low.

Wiper Delay 1: The scan tool displays Yes/No. This input to the body control module displays the state of the wiper delay switch.

Wiper Delay 2: The scan tool displays Yes/No. This input to the body control module displays the state of the wiper delay switch.

Wiper Delay 3: The scan tool displays Yes/No. This input to the body control module displays the state of the wiper delay switch.

Wiper Delay Input: The scan tool displays volts. This input displays the voltage supplied to the body control module.