Rear Axle Lower Control Arm Replacement

Rear Axle Lower Control Arm Replacement

Removal Procedure
1. Remove the rear support assembly.
2. Remove the rear suspension lower control arm to support assembly bolt and nut. Discard the nut and bolt.
3. Remove the rear suspension lower control arm from the support assembly.

Installation Procedure
1. Install the rear suspension lower control arm to the support assembly.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install a new nut and bolt to the rear suspension lower control arm to support assembly.
^ Tighten the nut and bolt to 90 Nm (66 ft. lbs.) plus and additional 60 to 75 degrees.
3. Install the rear support assembly.