Timing Belt Tensioner: Service and Repair

Timing Belt Tensioner Pulley Replacement

Removal Procedure





1. Disconnect the negative battery cable.
2. Remove the air cleaner assembly.
3. Remove the front timing belt cover.
4. Remove the timing belt.
5. Remove the timing belt tensioner bracket bolts.
6. Remove the timing belt tensioner bracket.

Installation Procedure





1. Install the timing belt tensioner bracket.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the timing belt tensioner bracket bolts.
^ Tighten the timing belt tensioner bracket bolt to 40 Nm (30 ft. lbs.).
3. Install the timing belt.
4. Install the front timing belt cover.
5. Install the intake air resonator.
6. Connect the negative battery cable.
^ Tighten the battery terminal bolts to 17 Nm (13 ft. lbs.).