33. Cylinder Head Disassemble

Cylinder Head Disassemble

^ Tools Required
- J 43963 Valve Spring Compressor (Off Vehicle)
- SA9102E-A Valve Seal Remover/Installer
- SA9124E Valve Spring Compressor/Remover





1. Remove the lifters. Place the lifters sequentially in the rack so that they can be installed in their original order, if being reused.
2. Use the SA9124E and J 43963 to compress the valve springs.





3. Remove the valve stem keys.
4. Remove the cap from the valve stem.
5. Remove the valve spring.





6. Remove the valve seal using the SA9102E-A.
7. Remove the valve spring seat from the cylinder head.
8. Remove the valves. Place the valves sequentially in the rack so that they can be installed in their original order, if being reused.