Suspension - Ball Joint/Steering Knuckle Nut Torque
File in Section: 03 - SuspensionBulletin No.: 04-03-08-005
Issue Date: May, 2004
Subject:
Service Manual Update Regarding Tightening Procedure and Specification for the Ball Joint-to-Steering Knuckle Nut
Models Affected:
2003-2004 Saturn ION
Attention: Technician
Purpose:
The purpose of this bulletin is to inform technicians of the correct tightening procedure and specification for the ball joint-to-steering knuckle nut. The correct tightening procedure and specification is as follows:
First pass 50 N.m (37 ft-lbs)
Reverse nut 3/4 turn
Second pass 50 N.m (37 ft-lbs) plus 30 degrees
The SI website has been updated and future Service Stall System SI CD releases will include this and other Service Manual updates.
Disclaimer