Rear

SEAT BELT REPLACEMENT - REAR

REMOVAL PROCEDURE




1. Remove the rear window panel trim.
2. Remove the rear seat retractor bolt.
3. Remove the rear seat belt retractor.

INSTALLATION PROCEDURE




1. Install the rear seat belt retractor to the rear shelf.
2. Install the rear seat belt retractor bolt (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolt to 45 N.m (33 lb ft).

3. Install the rear window panel trim.
4. Check the rear seat retractor belt for proper operation.