Center Rear

SEAT BELT REPLACEMENT - CENTER REAR

REMOVAL PROCEDURE




1. Remove the rear window trim panel.
2. Remove the retractor bolt from the rear center seat belt.
3. Remove the seat belt retractor from the rear shelf.

INSTALLATION PROCEDURE




1. Install the seat belt retractor to the rear shelf.
2. Install the bolt to the seat belt retractor

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolt to 45 N.m (33 lb ft).

3. Install the rear window panel trim.
4. Inspect the rear seat retractor belt for proper operation.