FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2004 >> ION L4-2.0L SC VIN P >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Manifold Pressure/Vacuum Sensor >> Service and Repair >> Manifold Absolute Pressure (MAP) Sensor Replacement (SCIP)

Manifold Absolute Pressure (MAP) Sensor Replacement (SCIP)

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REPLACEMENT (SCIP)

REMOVAL PROCEDURE




1. Disconnect the supercharger inlet pressure (SCIP) sensor harness connector.
2. Remove the SCIP sensor (1) from the supercharger.

IMPORTANT: If the SCIP sensor seal is damaged, the SCIP sensor must be replaced.

3. Inspect the seal for damage.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.

IMPORTANT: Use the new SCIP sensor seal provided with the new SCIP sensor.




1. Install the SCIP sensor (1) into the intake manifold.

Tighten the bolt to 10 N.m (89 lb in).

2. Connect the SCIP sensor harness connector.
pro multis Credits:Operation CHARM About Operation CHARM