Sunroof Motor/Actuator Replacement
SUNROOF MOTOR/ACTUATOR REPLACEMENTREMOVAL PROCEDURE
1. Remove the headliner.
2. Disconnect the actuator harness from the sunroof module.
IMPORTANT: If the sunroof window is partially closed, remove the actuator first before moving the sunroof window forward.
3. Disconnect the electrical connectors from the actuator leads.
4. Remove the screws securing the sunroof actuator to the sunroof module.
5. Remove the sunroof actuator.
INSTALLATION PROCEDURE
1. Synchronize the sunroof motor to the sunroof mechanism. Refer to Sunroof Motor Synchronization.
2. Install the sunroof actuator to the sunroof module.
3. Install the sunroof actuator screws.
NOTE: Refer to Fastener Note in Service Precautions.
Tighten the screws to 5.5 N.m (50 lb in).
4. Connect the electrical connectors to the sunroof motor/actuator.
5. Secure the electrical harness to the sunroof module.
6. Verify the sunroof operation.
7. Install the headliner.