Rear Door Limiter: Service and Repair

Door Check Strap Replacement - Side Rear

Removal Procedure

1. Remove the rear door water deflector. Refer to Water Deflector Replacement - Rear Door (Service and Repair) .




2. Remove the check link bolt.




3. Remove the check link nuts.
4. Remove the check link from the rear door.



Installation Procedure





1. Position the check link in the rear door.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the rear door check link nuts.

Tighten the nuts to 10 N.m (89 lb in).





3. Install the front door check link bolt.

Tighten the bolt to 9 N.m (80 lb in).

4. Install the rear door water deflector. Refer to Water Deflector Replacement - Rear Door (Service and Repair) .