Shift Solenoid: Service and Repair
CONTROL AND SHIFT SOLENOIDSREMOVAL
1. Remove transaxle case side cover.
IMPORTANT: Retainer clips hold in each of the valve line-ups. Use a small screwdriver in order to remove retainer clips. Be careful not to score valve body when removing retainer clips and valves. Before removing valve line-ups, inspect each valve line-up for free travel.
1-2 Shift Solenoid
2. Remove 1-2 shift solenoid retainer clip and 1-2 shift solenoid with O-ring.
2-3 Shift Solenoid
3. Remove 2-3 shift solenoid retainer clip and 2-3 shift solenoid with O-ring.
Pressure Control Solenoid
4. Remove Pressure Control Solenoid (PCS) retainer clip and pressure control solenoid with two O-rings and screen.
TCC Solenoid
5. Remove TCC solenoid retainer clip and TCC solenoid with two O-rings and screen.
INSTALLATION
IMPORTANT: Inspect all O-ring seals for damage prior to installation. Replace any damaged O-ring seals.
TCC Solenoid
1. Install TCC solenoid with O-ring and screen and install TCC solenoid retainer clip.
Pressure Control Solenoid
2. Install Pressure Control Solenoid (PCS) with two O-rings and screen and PCS retainer clip.
2-3 Shift Solenoid
3. Install 2-3 shift solenoid with O-ring and 2-3 shift solenoid retainer clip.
1-2 Shift Solenoid
4. Install 1-2 shift solenoid with O-ring and 1-2 shift solenoid retainer clip.
5. Install transaxle case side cover.
6. Start engine, warm up transaxle, and check for leaks.
7. Check for proper fluid level.