Installation

RIGHT ENGINE MOUNT AND BRACKET


INSTALLATION

CAUTION: THE L81 AND L61 ENGINE MOUNT BRACKETS HAVE DIFFERENT TORQUE REQUIREMENTS FOR ATTACHING TO ENGINE.

L81 Vehicles Only





1. Install engine mount bracket onto engine and tighten fasteners.
Torque: Right Engine Mount Bracket-to-Engine Bolts (1,81): 55 Nm (41 ft. lbs.)

L61 Vehicles Only





2. Install engine mount bracket onto engine and tighten fasteners.
Torque: Right Engine Mount Bracket-to-Engine Bolts (L61): 90 Nm (66 ft. lbs.)





3. Install engine mount into vehicle and tighten fasteners.
Torque: Right Engine Mount-to-Body Bolts: 55 Nm (41 ft. lbs.)





4. Install engine mount to bracket bolts.
Torque: Right Engine Mount-to-Bracket Bolts: 55 Nm (41 ft. lbs.)
5. Install air cleaner assembly.





5.1. Install air box. Ensure that lower pin engages into rubber mount grommet and that lower duct firs into resonator outlet.
5.2. Install air box mount bolt.
5.3 Install air cleaner.





5.4 Install air cleaner lid. Ensure that the lid hinge is fully engaged in air box slots or the lid may not properly seal.
5.5. Slid flexible hose and hose clamp on throttle body.
5.6. Tighten hose clamp.





5.7. Install EVAP purge valve assembly.





5.8. Connect MAF electrical connection.