System Functional Check

IMPORTANT:
Detailed information on component functions can be found in the Owner's Handbook insert that is included in kit.

^ Ensure new decklid latch is enabled only after two cycles of latch reset lever when decklid has been opened by the following methods:

- Opened with key

- Opened with vehicle interior release lever

- Opened with remote keyless entry (RKE) transmitter (if equipped)

^ Ensure folding seat back lock system is functioning properly.

^ Fold down rear seat backs and check the following:

- Verify trunk interior release handle functions with decklid closed.

- Ensure interior release handle LEDs illuminate and stay illuminated when decklid is closed and are not illuminated when decklid is open.